Office based personnel, Minimum of 10 years experience in the IT field. Performed how to manage computer-based information systems, including both software applications and computer hardware
Preference will be favourable to the applicants with Minimum 5 years work experience in GCC and not less than 5 years in Local for Construction Field.
Minimum 3 years with knowledge of computer, Aluminium doors, windows, curtain wall and tools.
Age Below 35 and Healthy. Can understand and speak little English.
Minimum 3 - 5 years experience in Pump & Motor Mechanical Services, Single Phase, three phase motors, transformers repairing, electronic board, Pumps types and work principle,
Degree with experience in commissioning, troubleshooting all types of water pumps (mechanical & electrical) and all types of control panels (VFD, DOL, start Delta). Experience in electricla motor connection. Hydraulic calculation. Installing electrical eq
Should have knowledge & experience in assembling/troubleshooting & repairing all types of control panels (DOI, Sta Delta, CFD etc)
Minimum 5-7 years experience and should have knowledge & experience in commissioning, troubleshooting, all types of water pumps (Mechanical & Electrical) and all types of Control Panels (VFD, DOL, Start - Delta). Piping work such as PPR & PVC. Electrical
ITI with similar expereince in AC Maintenance, all types of units. Gulf experience will be added advantage.
Should have knowledgfe & expereince on how to dismantle, assemble, diagnose the problem & repair pumps & sequence/operation of wwater pump. Also expereince in Shaft Alignment for Large Pumps.
Should have knowledgfe & expereince in Commissioning, Troubleshooting & Repairing all types of Wewage Pumps & Control Panels. Piping work such as PPR & PVC. Able to write technical report. - Min. 3 - 5 years experience.
ITI with similar expereince in Swimming Pool maintenance or Plumber with Pool Maintenance also preferred. Gulf experience will be added advantage.
Mandatory to all candidates should have Certifications from Access Control Manufacturers (especially Lenel is essential). Security certifications with ASIS internationational, trained in security profile. Other safety and security industry certifications
Mandatory to all candidates should have Certifications from Access Control Manufacturers (especially Lenel is essential). Security certifications with ASIS internationational, trained in security profile. Other safety and security industry certifications
Bachelors degree in commerce, business administration, or equivalent. Accounting background with proficient knowledge of inventory and inventory controls. Minimum 7 to 10 years of warehouse management experience in industry service. Proficient computer sk
B.Tech/Bsc Mechanical Engineering. Should be proficient in one discipline (i.e. Tank, Shutdown or Exchanger overhauling & Retubing) and aware of the others
10 years experience in Civil & Structural Engineering field, including minimum 5 years in development/project work and minimum 5 years in Estimation works, in the Oil & Gas processing or petrochemical industry with good estimation background.
Minimum 10-12 years experience in Estimation / Contracts / Commercial. Should have ability do the takeoff for Piping, Structural Steel, equipment erection, painting and make estimation accordingly.
Bachelors Degree in Mech. Engineering with HVAC Sales background. Minimum 5-8 years experience in HVAC Sales Business. Strong in HVAC Sales, Marketing and customer service background. Heat Load calculation, using HAP, carrier E20 program, etc. Knowledge o
Minimum 5 years duration after issuing Kharama card. Should perform limited specialist work for installation, operation and maintenance of switchgears and electricity distribution substation equipment and any machinery that control, protect, and monitor t
Degree or Diploma in Electrical Engineering. Should perform Oil Filtration related activity independently.
Degree with 5 Years & Diploma with 8 Years of experience in industrial construction. Basic, Design, Submission, Team mangement, site execution, prepare reports, daily progress reports, completion & handover, Firefighting works, sprinkers, piping, riser, e
Degree with 5 Years & Diploma with 8 Years of experience in industrial construction. Basis Design, submission and approvals, coordiantion with client and consutlant. Attend Meetings with Client & Consultant, site exectuion, team management, progress revie
Perform various task such as cutting material, shaping products, drilling and gear cutting. QAR300/- will be paid after checking the performance of the employee - within 60 days of time.
Perform various task such as Spur Gear, Worm gear, helical gear and Bevel Gears. (Master Gear MG500 Machine). QAR300/- will be paid after checking the performance of the employee - within 60 days of time.
Perform various task such as Square Thread and V thread cutting, Bearing seating, knowlddge in precision tools like, Micrometer, Vernier Caliper and Boar Gauge. Candidate shall perate all kind of lathe machines such as 4 feet to 20 feet length.QAR300/- w
Gulf Experienced with Valid UAE both Heavy & Light driving license.
must have Gulf Experience in Oil & Gas Industry with Shutdown Experience
must have Gulf Experience in Oil & Gas Industry with Shutdown Experience
must have Gulf Experience in Oil & Gas Industry with Shutdown Experience
must have Gulf Experience in Oil & Gas Industry with Shutdown Experience
must have Gulf Experience in Oil & Gas Industry with Shutdown Experience
must have Gulf Experience in Oil & Gas Industry with Shutdown Experience
Minimum 10 YEARS OF EXPERIENCE IN leading a well- equipped Valve & Machine Shop. B-TECH / DIPLOM IN MECHANICAL ENGINEERING OR EQUIVALENT
8 to 12 yrs. of experience in handling Sales and Project execution of the Painting & Blasting division of an organization. Mechanical Engineering Degree or Diploma Age from 35 to 45 years
Work for construction site/Asphalt Roads projects. Projects Site/Workshop based personnel with high knowledge for roads and stie civil projects. Applicant performs flag man, safety assistant, surveyor assistant, labour in equipment workshop, Asphalt Plant
1st Class diesel mechanic for Mercedez Benz, MAN/ACTROS/VOLVO/ (Model/Year - 2014 - 2015 till 2022). Workshop/project site based personnel with high knowledge and experiences for heavy trucks that uses for roads and site civil projects. Must know Inspect
1st Class Heavy Equipment Mechanic for (GRADER, DOZER, LOADER, EXCAVATOR, etc.). Workshop/Project site based personnel, Unskilled Hydraulic Mechanic for all heavy equipment which uses for roads construction, also performed overhauling & repair for all hea
BMOAG-BW 161 AD/24RH, DYNAPAC - CA270, LIUGONG - 612 H. Certified Operator of the mention equipment unit. Preference will be given to applicants with minimum of 10 years of GCC experience & having GCC Operator Licenses.
CATERPILLAR 12 H, 14H, 14M, and SHANTUI. Certified Operator of the mentioned equipment unit. Preference will be given to applicants with minimum 10 years of GCC experience & having GCC Operator Licenses.
CATERPILLAR 950/966/980, DOOSAN DL420 DL 300, LIUGONG & SHANTUI WHEEL LOADERS. Certified Operator of the mention equipment unit. Preference will be given to applicants with minimum 10 years GCC expereinces & having GCC Operator Licences.
CATERPILLAR D8R / D9R, KOMATSU, LIUGONG. Certified Operator of the mention equipment unit. Preference will be given to applicants with minimum 10 years GCC experience & having GCC Operator Licenses.
Heavy Truck Driver, (6x4), (Capable of both Dump Trucks and Trailer Trucks) Preference will be given to applicants with a minimum of 10 years of GCC experience & having GCC Driving License. Well experience with Articulated C>3500 Kgss combined GVW 3&04 -
Industrial Training or Tradesman Certificate in relevant field. Minimum 8 years experience in dismantling/assembling, overhauling, and repairing HVAC semi-hermetic compressors (reciprocating/screw type). He shall also poses knowledge and experience of all
Industrial Training or Tradesman Certificate in relevant field or Diploma in AC or ECE. Minimum 8 years experience in troubleshooting and maintenance of HVAC control panel and another electronic system. He shall be capable of reading control diagrams, PCB
Industrial Training or HVAC Tradesmen Certificate or equivalent with ability to read, write & speak english. Minimum 5 years in Maintenance Central HVAC Plants out of which preferaby 5 years in Gulf with experience on Air-cooled water Chillers and package
Industrial Training or HVAC Tradesmen Certificate or equivalent with ability to read, write & speak english. Minimum 8 years in Maintenance Central HVAC Plants out of which preferaby 5 years in Gulf with experience on Air-cooled water Chillers and package
ï‚· Sound knowledge of CP activities. ï‚· An understanding of legal principles and commercial/contract awareness of industry contracting practices. ï‚· Experience in pre and post contract development and management. ï‚· Understanding of Health, Safe
Gulf Experience. Control System & LV + Kuwait Driving License, otherwise 120
Gulf Experience. Have Kuwait Driving License, otherwise 120
Gulf Experience, Good Health, Semi-skilled Labour.
Gulf Experience in Grooved FP Fabrication
Gulf Experience in PB & HDPE Piping Fabrications
Gulf Experience in Building Projects
Graduate & Minimum 5 Years experience in Gulf in Construction/similar field.
Graduate & Minimum 5 Years experience in Gulf in Construction/similar field.
Graduate & Minimum 3 Years experience in Gulf in Construction/similar field.
Graduate & Minimum 3 Years experience in Gulf in Construction/similar field.
Graduate & Minimum 3 Years experience in Gulf in Construction/similar field.
ITI Instrumentation. Experience in Gulf 10 & India 5. Construction site experience, Drawing study, Material takeoff, fabrication and installation of Pipe and Fittings, repairing work, HDPE, PPR.PVC, CPVC, COPER Brasing,welding knowledge, fabrication and i
ITI Plumbing. Experience in Gulf 10 & India 5. Construction site experience, Drawing study, Material takeoff, fabrication and installation of sanitary Pipe and Fittings, repairing work, HDPE, PPR.PVC, CPVC, COPER Brasing, welding knowledge, Tools knowledg
Degree/ IT / Electronics. Experience in Gulf 2 & India 5 years.
Degree/IT/Electronics. Experience in India 5 Years. Site operation experience, Testing & Commissioning of CCTV, Access Control, instrumentation, fire alarm& gate barriers, implementation & troubleshooting of CCTV, NVR,NSM,Serves(Windows and Linux), Implem
Preparation of progress report on daily basis of each welder Preparing of inspection note for the received items and get approval from quality dept. Liaise with QC department to complete inspection and testing.
Any Degree & Gulf experienced with minimum 4 Years in Supermarket/Hypermarket/FMCG Stock Maintenance. Also worked as Manager level or Assistnat Manager level in any FMCG/Hyper, etc.
Engineering Degree/Diploma - LEEA (Appointed person for Lifting Operations), NSL, NPROS, Auto CAD LICCOn & LIKON Software. Ms. Office. Minimum 8 Years with Engg. Degree or 15 years with Diploma. Must be familiar with Safety Rules, site hazards in Lifting
SHOULD HAVE 2 OR 3 SHUTDOWN EXPERIENCES IN OIL AND GAS.
SHOULD HAVE 2 OR 3 SHUTDOWN EXPERIENCES IN OIL AND GAS.
SHOULD HAVE 2 OR 3 SHUTDOWN EXPERIENCES IN OIL AND GAS.
SHOULD HAVE 2 OR 3 SHUTDOWN EXPERIENCES IN OIL AND GAS.
SHOULD HAVE 2 OR 3 SHUTDOWN EXPERIENCES IN OIL AND GAS.
SHOULD HAVE 2 OR 3 SHUTDOWN EXPERIENCES IN OIL AND GAS.
SHOULD HAVE 2 OR 3 SHUTDOWN EXPERIENCES IN OIL AND GAS.
SHOULD HAVE 2 OR 3 SHUTDOWN EXPERIENCES IN OIL AND GAS.
SHOULD HAVE 2 OR 3 SHUTDOWN EXPERIENCES IN OIL AND GAS.
SHOULD HAVE 2 OR 3 SHUTDOWN EXPERIENCES IN OIL AND GAS.
SHOULD HAVE 2 OR 3 SHUTDOWN EXPERIENCES IN OIL AND GAS.
SHOULD HAVE 2 OR 3 SHUTDOWN EXPERIENCES IN OIL AND GAS.
SHOULD HAVE 2 OR 3 SHUTDOWN EXPERIENCES IN OIL AND GAS.
SHOULD HAVE 2 OR 3 SHUTDOWN EXPERIENCES IN OIL AND GAS.
SHOULD HAVE 2 OR 3 SHUTDOWN EXPERIENCES IN OIL AND GAS.
Minimum 2 Years expereince in Food Service/Restaurant Service/Buffet Service. Should speak fluent english and age above 21 years.
Gulf Experience in relevant field and age upto 45 years. Bulk production experience is must.
Graduate/PG in in Microbiology/Dietetics, minimum 5 years in reputed health care center/catering company. Ex-gulf will be given preference
Certified Degree in Electrical Engineering, PMP Certification, EMALV authorisation required. 12 - 15 years expereince in execution of MEP Projects in Commerical and Indutrial sectors.
Minimum 5 years experience in Sales, marketing or related field. Candidates must work in Bahrain or in the Gulf region in manpower supply/outsourcing management.
Degree/Diploma - 2 - 4 years expereince preferably having experience in Aluminium Façade Industries. Handle all documentation of Project, preparation of correspondence & submittals.Prepare material samples and drawing submittals. Study Architectural dra
Diploma in Instrumentation/equivalent or ITI in Instrumentation. 3 Years of work experience in a similar environment in Oil & Gas or Petrochemical Industries.
Minimum 5-8 years experience in Gulf Countries also in Kuwait. Must have Kuwait or GCC valid or expired license holders. Two years completed after exiting from Kuwait.
Minimum 5-8 years experience in Gulf Countries also in Kuwait. Must have Kuwait or GCC valid or expired license holders. Two years completed after exiting from Kuwait.
Minimum 5-8 years experience in Gulf Countries also in Kuwait. Must have Kuwait or GCC valid or expired license holders. Two years completed after exiting from Kuwait.
Minimum 5 Years GCC Experience
Minimum 5 Years GCC Experience
Minimum 5 Years GCC Experience
· A Minimum of 12 years of experience in operating and Commissioning Refinery/Petrochemicals. · BE in Chemical Engineering or Equivalent. · At least 6 years of experience in a similar position with a pre-commissioning and commissioning project ·
·A Minimum of 12 years of experience in operating and Commissioning Refinery/Petrochemicals. · BE in Chemical Engineering or Equivalent. · At least 6 years of experience in a similar position with a pre-commissioning and commissioning project · P
A Minimum of 12 years of experience in operating and Commissioning Refinery/Petrochemicals. · BE in Chemical Engineering or Equivalent. · At least 6 years of experience in a similar position with a pre-commissioning and commissioning project · Prov
ECNR & ECR Candidates can apply.
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCES MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
B.Tech with minimum 2 years of experience in Oil & Gas. Knowledge of various kinds of permits using Oil & Gas.
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCES MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
3 TO 4 SHUT DOWN EXPERIENCE MUST
minimum 8 years of experience within a major petroleum organization preferably upstream including the application of risk management principles.
BSC in Computer Science/Computer Engineering or other related Degree, 8 to 10 years of relevant work experience.
Bachelors degree in Computer Science, Management Information System, Computer Engineering or similar computer discipline.
Minimum 10-15 Years expereince in Oil & Gas field maintenance, Project support, installtion, management, facility commissioning, operations, etc.
Minimum 10-15 Years experience in Oil & Gas field maintenance, Project support, installation, management, facility commissioning, operations, etc.
Young, Healthy, Presentable, Clean, Polite, kind and Good looking personality. Basic acceptable knowledge of English or Arabic Speaking. Work Place : Indoor and outdoor Malls, Hospitals, Offices, Restaurants, Banks, Ministries, etc. ONLY ECNR CANDIDATES
Ensure the integrity and sustainability of the BLNG assets by effective supervision of the multi discipline Turnaround, Unit Shutdowns and non-routine maintenance execution teams through: ï‚· Implementation of Turnaround and Unit Shutdowns maintenance p
Kuwait return candidates with Valid Kuwait Light Driving Licence may apply. Must be smart and English speaking.
Gulf Experience in relevant field and age upto 45 years. Bulk production experience is must.
Gulf Experience in relevant field and age upto 45 years. Bulk production experience is must.
Degree in Mechanical Engineering (BE/Btech) with 10-12 Years experience in Project Management. ADNOC Offshore Expereince will be an added advantage.Site Engineer with previous experience under Well Hook Up or Blanket Contract for Minimum 1 Year. Check Pla
Only Six Months Contract. Graduate Planning Engineering with Minimum 5 years Oil & Gas Shutdown experience. IMMEDIATE DEPARTURE - GASCO PROJECT.
ITI/Diploma/Engineering in relevant field. Successful applicants should have at least 3-4 years of experience in Crane Maintenance. Gulf Experienced candidates will be preferred.
Degree/Btech in Mech. Engineering. Minimum experience 5-9 years and experience in Mechanical Installation, Mechanical Equipment Installation, Site follow-up and control the site installations works.
Minimum 2-5 years experience in the Gulf in relevant fiel and Good Communication Skills.
Drivers having valid Indian Driving Licence or Saudi Arabia Driving Licence is mandatory. Must be smart and with pleasing personality and fluent in English.
Degree in Civil Engineering with minimum 5-8 years experience in estimation of Civil Works (Excavation, Backfilling, Foundations, Building works etc) for Petro-chemical industry.Should have thorough knowledge in computing man-hours, quantity estimation of
Degree in Mechanical Engineering with minimum 5-8 years experience in Estimation of Mechanical Works ( Piping, Structural Steel, Equipment Erecting etc) for Petro-Chemical Industry. Should have thorough knowledge in computing man-hours, quantity estimatio
Must have knowledge in Control Panel Erection, Maintenance and Trouble Shooting. Programe uploading & downloading. Control reading and preparation knowledge of HVAC System as well as BMS System.
ITI Graduation and 8 years expereince in the similar field.
Diploma or Graduation and 10 years expereince in the similar field.
Diploma or ITI Graduation and 8 years experience in the Operation & Maintenance in HVAC.
Mechanical or Electrical Bachelor Engineering and 10 - 15 years of experience.
Bachelors Degree and 5 years experience in Project Material Controller or relevant Field.
B.E in Mechanical Engineering and 4 - 5 years experience in the same or relevant field.Review of Tender documents on receipt to ensure its completeness. Organize/take part in bid initiation & review meeting. Responsible for review/preparation of OME (Orde
Degree in Mechanical Engineering and 5 - 7 years experience in drafting.GA drawings, Floor Plans, Sectional view/views along grids. Connection details, Bolted or welded. Welding symbols, shall understand clearly shop and field joints, type of weds, Materi
With Catering Course with Start Hotel Experience / any Hospitality Industry. Must be Fluent in English.
Candidates having minimum 6 years experience in Bulk Cooking of Continental and Arabic Food and presently working as Commi 1 only may apply.
Candidates having minimum 8 years experience in Builk Cooking of Continental & Arabic Food and presently working as CDP only may apply.
Cook specialised in Middle Eastern, Indian & Western cuisine.
Diploma or any Technical qualification. Experience in Restaurant and Bakery equipment Maintenance is a must and also should manage a team of Technicians of 8 - 10.
Minimum of 7-10 years operational experience in a similar position.Knowledge in ERP/Tally and other accounting software will be added advantage. Responsible for all Imports & Exports of all divisions and product lines of the Company
Gulf Experienced candidates and ARAMCO Valid Certification is must.
Gulf Experienced candidates and ARAMCO Valid Certification is must.
Gulf Experienced candidates and ARAMCO Valid Certification is must.
Gulf Experienced candidates and ARAMCO Certified (Valid / Invalid) Salary will be changed after ARAMCO Certification.
Candidates must have ARAMCO certification / Valid or Invalid.
Candidates must have ARAMCO certification / Valid or Invalid.
Candidates must have ARAMCO certification / Valid or Invalid.
Preferably Degree in Hospitality Management or Equivalent Proven track record in a similar environment. Proven experience within a high volume catering environment. Excellent communication skills with Customers, Client, Colleagues and Team Members
Responsible for the complete office & logistics related activities including monthly purchasing of office stationaries, cleaning materials, and its monthly stock register. Also all LPOs related to these activities are to be issued using EPICOR system. Lab
Must be Healthy and Age Below 40 Years.
Ensures that all the Purchase Orders assigned by theBuyers are expedited as per Purchase Order requirements and the process in accordance with Company policies and procedures, to secure the quality and timely delivery of materials/services.Monitoring supp
Degree in Engineering or Master in Business Administration with specialization in Operations, with 10 Years experience in similar role preferably in Marine/Oil & Gas Industry
Graduate/Diploma & 5 years Oil & Gas experience.
Graduate/Diploma & 5 years Oil & Gas experience.
Must be specialised in Boilers with a Mechanical Background. 5-10 Years experience in Boiler as well as expanded Polystyrene (EPS) Manufacturing Plant is a great advantage.
Diploma/BA/BICS. Minimum 5 years hands on experience in the field of housekeeping in office and community or Mall including Minimum 2 years in Gulf. BICS Accreditation is must.
Diploma/BA Degree/BICS. Minimum 8 years hands on experience in Mall, Community and Office Cleaning including Minimum 4 years in Gulf. BICS Accreditation is must.
Diploma/ITI. Minimum 5-8 years hands on experience in the field of BMS Operations/Maintenance including minimum 3 years in Gulf.
Degree/Diploma - Electrical/Electronics or Mechanica. Minimum 5-8 Years hands on experience in the fields of MEP & Infrastructure, including min. 3 years in Gulf.
Gulf returned candidate with Shutdown experience
Gulf returned candidate with Shutdown experience
Gulf returned candidate with Shutdown experience
Gulf returned candidate with Shutdown experience
Gulf returned candidate with Shutdown experience
Diploma/Graduation in MEP engineering and Must have Minimum 10 Years (5 Years in Petrochemical or Oil & Gas). Specialist Cost Management/quantity surveying consultancies working within the Oil & Gas, Petrochemical Industry. Estimating quantities, costs an
The role of this requires previously worked in Turnaround Logistics, specially in Oil & Gas, Refinery & Petrochemical Companies and been responsible for organizing & coordinting Logistics activities. EH & S policies 7 procedures such EPPS, Industrial Log
Must have High School/Graduate and good verbal & written English as well as reasonable Mathematics skills. Minimum 2 Years experience in Petrochemical/Oil&Gas or similar environment. Proficiency in MS Office tools.Knowledge of SAP/ERP is preferred and han
Must have passed High School and good English Communication (Read & Speak). Must have minimum 3 years experience in Petrochemical / Oil & Gas. Must have passed basic course in Fire Fighting & Possess a certificate of completion.
Graduate in Science or Diploma in Mechanical/Electrical/Chemical Engineering (Distant Educational Qualifications shall not be considered). Minimum 3 years experience in Petrochemical or Similar industries, preferably GCC. If you do not have abroad experie
Must have experienced in Valves Services/Refurbishments. Must have ASNT Level II certification. Prefeerred to have CSWIP or AWS welding inspector certificates. Experienced in preparation & Implementing of the documents such as ITP, Method Statement, Refur
Experience in Gas Cutting and Sheet Metal.
Good Experience in Aluminium Welding who knows MIG & ARC.
Minimum 5-8 years experience in Gulf countries as Backhoe Loader Operator. Must have Kuwait or GCC Licence Holders and have left Kuwait more than 2 years ago.
Minimum 5-8 Years experience in Gulf countries as Skid Steer Operator. Must have Kuwait or GCC Licence Holders and have left Kuwait more than 2 years ago.
Minimum 5 - 8 Years experience in Gulf countries as Crane Operator. Must have Kuwait or GCC Licence Holders and have left Kuwait more than 2 years ago.
Minimum 5-8 Years experience in Gulf countries as Crane Opertaor & Must have Kuwait or GCC Licence Holders and have left Kuwait more than 2 years ago.
Minimum 5-8 years experience in Gulf countries as Wheel Loader Operator. Must have Kuwait or GCC Licence Holders and have left Kuwait more than 2 years ago.
Degree/Btech in Mech. Engineering. Minimum experience 5-9 years and experience in Mechanical Installation, Mechanical Equipment Installation, Site follow-up and control the site installations works.
Who knows Welding & Having experience in Gas Cutting - Preferred candidates from Gujarat Ship Breaking Yards.
Relevant experience in Sales of Mobile Tents. Preferably Arabic Speaking and gulf experience in sales.
Relevant experience in fabrication & welding for Tent manufacturing.
Relevent experience in PVC Tarpaulin temporary tent/house making.
(1) Chiller Troubleshooting experience (2) Function of Humidity Control (3) Automatic Pump down system operations (4) Function of positive and negative pressure (5) How Anti-Freeze alarm works (6) Digital and analog signal.
(1) Chiller Troubleshooting experience (2) Function of Humidity Control (3) Automatic Pump down system operations (4) Function of positive and negative pressure (5) How Anti-Freeze alarm works (6) Digital and analog signal.
(1) Chiller Troubleshooting experience (2) Function of Humidity Contro (3) Automatic Pump down system operations (4) Function of positive and negative pressure (5) How Anti-Freeze alarm works (6) Digital and analog signal.
(1) Chiller Troubleshooting experience (2) Function of Humidity Control (3) Automatic Pump down system operations (4) Function of positive and negative pressure (5) How Anti-Freeze alarm works (6) Digital and analog signal.
Hotel Management/HR, minimum 4 years experience. Age below 35.
Hotel Management/HR, minimum 3 years experience. Age below 30.
Hotel Mangement/HR, minimum 6 years experience. Age below 30.
Hotel Management/HR, minimum 5 years experience.Age below 30.
Hotel Mangement/BBA with accounting background and minimum 8 years experience. Age below 40
Relevant experience in Star Hotels as Sous Chef - Continental. Certificate in Hotel Management.
ITI/ITC in Electrical/Mechanical & minimum 8 years of experience in installation, repair and maintenance of all kind of Diesel Generators and well knowledge abut ATS/Synchronization controls.
Must have experience with & Valid Qatar Driving Licence Free Food, Accommodation, Transportation, Medical, Laundry & Wifi facilities. Round Trip Ticket, Weekly Off except Match Days. Contract: 2 or 3 Months
Must have similar experience & Valid Qatar Licence. Free Food, Accommodation, Transportation, Medical, Laundry & Wifi facilities. Round Trip Ticket, Weekly Off except Match Days. Contract: 2 or 3 Months
Must have experience in Loading & Unloading Free Food, Accommodation, Transportation, Medical, Laundry & Wifi facilities. Round Trip Ticket, Weekly Off except Match Days. Contract: 2 or3 Months
Must have experience in Catering Store. Free Food, Accommodation, Transportation, Medical, Laundry & Wifi facilities. Round Trip Ticket, Weekly Off except Match Days. Contract: 2 or 3 Months
Freshers can also apply for this vacancy Free Food, Accommodation, Transportation, Medical, Laundry & Wifi facilities. Round Trip Ticket, Weekly Off except Match Days. Contract: 2 or 3 Months
Experience in Catering companies / similar field in gulf or in Hotels. Free Food, Accommodation, Transportation, Medical, Laundry & Wifi facilities. Round Trip Ticket, Weekly Off except Match Days. Contract: 2 or 3 Months
Experience in Catering companies in Gulf or in Hotels Free Food, Accommodation, Transportation, Medical, Laundry & Wifi facilities. Round Trip Ticket, Weekly Off except Match Days. Contract : 2 or 3 Months
Experience in Catering companies in Gulf or in Hotels Free Food, Accommodation, Transportation, Medical, Laundry & Wifi facilities. Round Trip Ticket, Weekly Off except Match Days. Contract: 2 or 3 Months
Must have Degree/Diploma in Hotel Management, minimum 4 years experience in Catering Companies / Banquet/Hotels with fluent in English speaking. Free Food, Accommodation, Transportation, Medical, Laundry & Wifi facilities. Round Trip Ticket, Weekly Off
Must have Degree/Diploma in Hotel Management, minimum 4 years experience in Catering Companies / Banquet/Hotels with fluent in English speaking. Free Food, Accommodation, Transportation, Medical, Laundry & Wifi facilities. Round Trip Ticket, Weekly Off
Must have Degree/Diploma in Hotel Management, minimum 5 years experience in Catering Companies / Banquet/Hotels with fluent in English speaking. Free Food, Accommodation, Transportation, Medical, Laundry & Wifi facilities. Round Trip Ticket, Weekly Off
Presently working as Chef De Partie. Must have Degree/Diploma in Hotel Management, minimum 6 years experience in Catering Companies / Banquet/Hotels with fluent in English speaking. Free Food, Accommodation, Transportation, Medical, Laundry & Wifi faci
Presently working as Sous Chef. Must have Degree/Diploma in Hotel Management, minimum 8 years experience in Catering Companies / Banquet/Hotels with fluent in English speaking. Free Food, Accommodation, Transportation, Medical, Laundry & Wifi facilitie
Presently working as Head Chef. Must have Degree/Diploma in Hotel Management, minimum 10 years experience in Catering Companies / Banquet/Hotels with fluent in English speaking. Free Food, Accommodation, Transportation, Medical, Laundry & Wifi faciliti
Presently working as Operations Manager. Must have Degree/Diploma in Hotel Management, minimum 10 years experience in Catering Companies / Banquet/Hotels with fluent in English speaking. Free Food, Accommodation, Transportation, Medical, Laundry & Wifi f
With similar experience.
Age must be above 30 years & with minimum 10 years experience in bulk cooking.
With Catering Cos Experience minimum 5 years (Gulf Experience)
Age must be above 25 years & with minimum 6 years experience in bulk cooking.
With experience in Hospital Catering.
Min 6 years in various types of Salads and different dressings
Age must be above 25 years & with minimum 8 years experience in bulk Baking & Gulf Experience
Age must be above 25 years & with minimum 6 years experience in bulk Baking.
Butchers with Hotel/Catering with Machine Cutting experience.
Plus II or Degree. Receiving, unpacking and arranging new shipments from suppliers & vendors. Arranging and labelling goods in the display shelves. Assisting customers in finding the products they are looking for. Processing customer payments at the check
KD 150+25 (Kuwait & Bahrain License Holders) Relevant experience & Original Kuwait/Bahrain valid license.
KD140+20 (Kuwait License Holders) KD 130 + 20 (Bahrain License Holders) Relevant experience & Original Kuwait/Bahrain valid license.
CONCRETE MIXER DRIVERS WITH KUWAIT LICENSE + INDIAN LICENSE. THE CANDIDATE MUST BE OUT OF KUWAIT FOR MORE THAN 2 YEARS. MUST BE FULLY VACCINATED
Degree in Mechancial/Civil Engineering from a recognized university, minimum 5 Years experience of Industrial Construction in Oil & Gas Industry. Expert in Prima Vera, MS Office, MS Project
Relevant experience.
• Candidates should have a Civil Engineering Degree Must have extensive experience within the Oil & Gas Industry. • Should have hands on experience in Design Candidates should be well Conversant with international codes & standards such as ACI, ANS
Relevant experience.
RELEVANT EXPERIENCE IN HVAC MECHANICAL SIDE.
RELEVANT EXPERIENCE IN HVAC CONTROL TECHNICIAN
RELEVANT EXPERIENCE IN HVAC ELECTRICAL SIDE.
RELEVANT EXPERIENCE IN HVAC
Welcoming and Seating guests, taking guest orders, communicating them effectively to the kitchen and in addition memorizing the menu. The Catering Driver is responsible for delivering orders for the Morning Glory Café to a variety of locations as well as
Diploma/itc/iti in Automobile or Mechanical
Diploma/itc/iti in Automobile or Mechanical
• Must present monthly strategy plan in focusing to the improvement of chicken farm. • Managing of budget to reduce the farm expenses and to improve its profit. • Assess of employees productivity. • Setting of mission and vision for the goals o
• Provides financial information to management by researching and analyzing accounting data; preparing reports. • Prepares asset, liability, and capital account entries by compiling and analyzing account information. • Documents financial transact
• Protects assets by ensuring compliance with internal control procedures and regulations. • Ensures compliance with established internal control procedures by examining records, reports, operating practices, and documentation. • Verifies assets a
Financial controllers are tasked with overseeing day-to-day accounting functions, integrating finance operations, forecasting and budgeting, handling tax matters, preparing financial reports, Audit and ensuring organizational financial stability. • Day
• Should have experience with HR procedures and can juggle various administrative tasks in a timely manner. • Should have experience in managing the HR team. • Prepare HR documents, like employment contracts and new hire guides • Revise compan
Shutdown Experience
Shutdown Experience
Shutdown Experience
TIG, Incoloy Pipe Welding 6G (Shutdown Experience)
SMAW (Weld Overlay on MS Plate with SS Eletrode) 2G & 3G (Shutdown Experience)
Shutdown Experience
Shutdown Experience
Shutdown Experience
Shutdown Experience
with cutting and grinding experience, to assist fitters at site
Fitters who got experience in the maintenance of static equipments like heat exchangers,pipes and related equipments
5 Years relevant shut down experience in refinery/petrochemical projects
MS Pipe Welding (SMAW) 6G CS Pipe E6010/E7018 (Running Card must)
with relevant shutdown experience
with experience in piping / structural and static equipement manitenance experience
Must have 6 to 8 year of shutdown experience in piping / structural and static equipement maintenance experience
Diploma/Degree with 8 years experience in refinery/petrochemical project. Must have NEBOSH/IOSH certification.
Degree In Mechanical Engineering with 6-8 years experience in Oil & Gas maintenance /Shutdown project
Degree In Mechanical Engineering with 6-8 years experience in Oil & Gas maintenance /Shutdown project
Candidate must possess Diploma/ITI, should have worked with Diesel Engines, preferably with Fire Pump.
Candidate must possess Diploma/ITI certification, 4 -5 years experience, good knowledge about various glass installation process. Good Communication skill and some computer knowledge. Knowledge to create, read and undersstand CAD drawings, creative mindse
Able to Operate the CNC Glass Cutting Machine ( Bottero )
• University Graduation. Additional qualification of an MBA would be an added advantage. • 10 to 12 years of experience in the areas of Business Analysis for a large organization of repute. • Excellent computing skills including high end presen
• A degree in any Engineering or Accounting • 10 to 12 years of experience in the areas of costing & budgeting for a Facilities Management or Construction projects organization. • Understanding and application of P & L, risk profile, cash-flow
A professional with an Engineering degree and indicatively 12+ years of total experience in a cyber security projects rich environment. Deep knowledge of PCD and IT security solutions is essential. free recruitment
ITI/HSC OR EQUIVALENT PROFESSIONAL QUALIFICATION WITH MINIMUM 5-10 YRS EXP IN MAINTENANCE / REPAIR OF CRANES - MOBILE / CRAWLER CRANES / HEAVY VEHICLES LIKE TRAILER / TIPPER / BUS / DUMPER ETC. AGE 26-37
ITI/HSC OR EQUIVALENT PROFESSIONAL QUALIFICATION WITH MINIMUM 5-10 YRS EXP IN MAINTENANCE / REPAIR OF CRANES - MOBILE / CRAWLER CRANES /HEAVY VEHICLES LIKE TRAILER / TIPPER / BUS / DUMPER ETC. AGE 26-37
ITI/HSC OR EQUIVALENT PROFESSIONAL QUALIFICATION WITH MINIMUM 5-10 YRS EXP IN MAINTENANCE / REPAIR OF CRANES - MOBILE / CRAWLER CRANES / HEAVY VEHICLES LIKE TRAILER / TIPPER / BUS / DUMPER ETC. AGE 26-37
BE/BTECH/DIPLOMA IN ELECTRONICS OR 2 YEARS ITI IN ELECTRONICS WITH 5-10 YEARS EXP IN SIMILAR FIELD IS A MUST. SHOULD HAVE EXP IN ASSEMBLING, TESTING, REFURBISHMENT, SERVICE AND PREVENTIVE MEASURES OF CRANES-MOBILE / CRAWLER CRANES & KNOWLEDGE OF ELECTRICA
DIPLOMA IN MECHANICAL / CIVIL ENGINEERING OR EQUIVALENT 3 YEARS DEGREE COURSE WITH MIN 5 YEARS EXPERIENCE IN SIMILAR FIELD IS A MUST. SHOULD HAVE EXPERIENCE IN EQUIVALENT POSITION AND SHOULD BE COMPETENT TO READ AND COMPREHEND LOAD CHART AND RIGGING PLAN.
BE/DIPLOMA IN MECHANICAL / AUTOMOBILE ENGINEERING WITH 5-10 YRS EXPERIENCE IN SIMILAR FIELD IS A MUST. SHOULD HAVE EXPERIENCE WITH CRANES (ODC / HEAVY LIFT/ WORK SAFETY). AGE 26-40
BE/DIPLOMA IN MECHANICAL / AUTOMOBILE ENGINEERING WITH 5-10 YRS EXPERIENCE IN SIMILAR FIELD IS A MUST. SHOULD HAVE EXCELLENT KNOWLEDGE IN OPERATIONS AND MAINTENANCE OF CRANES - MOBILE/CRAWLER CRANES & HEAVY EQUIPMENTS & SHOULD HAVE EXPERIENCE IN HANDLING
DEGREE IN MECHANICAL / AUTOMOBILE ENGINEERING. EXPERIENCE IN INSPECTION/CERTIFICATION SERVICES FOR LIFTING EQUIPMENT/AUTO CAD. QUALIFIED AS A COMPETENT PERSON BY LIFTING EQUIPMENT ENGINEERS ASSOCIATION .AGE 35 - 40
MINIMUM 5 YEARS IN DRIVING TRAILERS WITH VALID ORIGINAL GCC LICENSE. AFTER GETTING QATAR HEAVY LICENSE THE SALARY WILL BE 1900 + 300. AGE 26-37
MINIMUM 5 YEARS EXPERIENCE IN OPERATING CRANES WITH SAFETY OPERATING PRACTICES. MUST HAVE VALID GCC LICENSE. AGE 26-37. AFTER GETTING QATAR OPERATOR LICENSE THE SALARY WILL BE 2500 + 300
MINIMUM 5 YEARS IN DRIVING TRAILERS WITH VALID / EXPIRED QATAR ORIGINAL CARD LICENSE / COPY. AGE 26-37
MINIMUM 5 YEARS EXPERIENCE IN OPERATING CRANES WITH SAFETY OPERATING PRACTICES. MUST HAVE VALID / EXPIRED QATAR ORIGINAL CARD LICENSE OR COPY. AGE 26-37
BAPCO approved Safety Engineer. Experience in Shutdown Project.
Gulf Experience in relevant field and age upto 40 years.
Gulf Experience, Industrial Catering Experience, 10-15 years of experience In Bulk Cooking - Age upto 45 years.
Should have relevant skills & expereience
Should have relevant skills & expereience
Minimum 3 yrs. Experience in same field.Minimum a bachelor’s degree in Marketing. Excellent interpersonal skills. • Creative thinker • Self-motivated and a passion for hospitality
2 Years experience in the Food Industry.
• Well-established/senior-level working experience as art and visual designer/director for +4-5 years for marketing/ advertising agencies. • Having strong social/digital background. • Always updated with latest trends / new formats / platforms, et
Minimum 7 yrs. Experience in same field. • Expert in Microsoft Dynamics 365 developments and integrations • Expert in MS Power Apps and MS PowerBi • Expert in C#, JavaScript, AJAX, SQL Server, ASP.NET, CSDL, OData, REST, JSON, WESDL (SOAP), XML,
• Minimum of 3 years of related (operational & administrative) experience in a large • organization preferably in oil/gas catering / hospitality environment • Working as chef is an advantage • Working knowledge of contract management • E
UAE Experienced Sales Executives (preferably with Car rental companies) or similar experience. UAE driving Licence is must.
With relevant experience
With relevant experience
Relevant experience with Qatar Licence.
With relevant experience
With relevant experience
With relevant experience
With relevant experience
Who can add new customers, bring new ideas, create a brand building. With valid UAE driving license.
Experience: 15 Years. Who can run a big Central Kitchen and manage clients. Expert in production side of catering company.
Forklift Operator (For Cold Storage Facility) Experience with Valid UAE license.
School passed out &Minimum 2-3 years of relevant experience in cleaning of malls, star hotels, residential buildings etc.
School passed out & Minimum 8 years hands on experience in the maintenance (Sound knowledge in domestic & industrial painting) including Min. 4 years in Gulf.
ITI - Plumbing & Minimum 8 years hands on experience in the field of Plumbing Maintenance (Sound knowledge in domestic & industrial plumbing systems such as drainage, potable water, TSE, etc.) including Min. 4 years in Gulf.
Diploma/ITI - A/C & Refrigeration & Minimum 5-8 years hands on Experience in the field of HVAC Operations/Maintenance including Min. 3 years in Gulf.
Degree/Diploma - Electrical, Electronics or Mechanical & Minimum 5-8 years hands on experience in the fields of MEP & Infrastructure, including min. 3 years in Gulf.
Degree - Electrical, Electronics or Mechanical & Minimum 5-8 years hands on experience in the fields of MEP & Infrastructure, including min. 3 years in Gulf. Preferable GCC driving license.
Degree - Electrical, Electronics or Mechanical & Minimum 10-15 years hands on experience in the fields of MEP & Infrastructure, including min. 5 years in Gulf. Preferable GCC driving license.
Candidate should have 5 star hotel experience with good knowledge of OPERA system. Must have good communication skill
(With expired Kahramaa license) But must have completed 5 years of holding the license.
Preferably Degree in Quantity Surveying or Engineering (Civil / Structural / Construction) Possess relevant skills in MS Office, Project Softwares, At least 5 years working experience in Building Construction specializing in Quantity Surveying or Engine
Repair of all Heavy Diesel Vehicles
Minimum Qualification: ITI Or Diploma in Mech/Automobile Minimum Experience: 3 to 4 years at a heavy machinery dealership in GCC A valid Bahrain Driving License (light vehicle at least) is must.
Minimum Qualification: Diploma in Mech/Automobile Engineering Minimum Experience: 5 years in any construction machinery/truck dealerships
Repair of all Hydraulic Equpts of Heavy Vehicles
(Preferred Valid Bahrain / GCC Driving license) Exp in Heavy vehicle
With Gulf exp. Age below 40
With Gulf exp. Age below 35
With Gulf exp. Age below 40
With Gulf exp. Age below 35
With Gulf exp. Age below 40
With Gulf exp. Age below 40
With Gulf exp. Age below 40
With Gulf exp. Age below 40
Crane Opertor (50-350 Ton)With Kuwait License/Age Max 45 Must have gulf exp.
Operator Boom Truck - Operate all Capacitty +Manlift+forklift With Kuwait License/Age Max 45
Construction Equipment Operator WL, HE MG,BHL, (Must Operate Min 4 Equipments With Kuwait License/Age Max 45
With Kuwait License/Age Max 45
With Kuwait License/Age Max 45
WITH RELEVANT EXPERIENCE
With valid Qatar driving license. Only ECNR
Minimum 8-10 years total experience in Project works / Estimation / Contracts / Commercial in Oil & Gas, Petro-Chemical plants. Should have ability do the takeoff for Piping, Structural Steel, Equipment, Painting and other mechanical work to make cost
Fabrication of Pressure Vessels, Piping, Structural Steel, Skid / Modular Assembly. Handled minimum Work Force size 300 No. Key Responsibilities/Accountabilities: ï‚· Managing all aspects of the day-to-day activities of the Fabrication Facility. ï‚· E
BE/Btech (Civil)(Highrise Building Experience) around 8 to 10years experience Collaborate with engineers, architects etc. to determine the specifications of the project. 2. Negotiate contracts with external vendors to reach profitable agreements. 3. Ob
8 Color Printing Machine Operating Experience is must preferably LISHG brand, box bag making machine operations (ZX LT500 )
Recyclable Carry Bag Manufacturing unit
With relevant experience (Experience in Maintenance is a must)
Minimum 3Years with the knowledge of Computer,Aluminum doors,windows,curtain wall and tools
Minimum 3Years with the knowledge of aluminum doors,windows, C/W,ACP, Frameless, Spider System
Age below 35 Healthy candidates who can understand and speak little bit english
with similar experience (Gulf experience preferred)
PLUMBER * Should have knowledge & experience in Plumbing work specially booster & submersible pumps able to do piping work such as PPR & PVC ELECTRICIAN * Should have knowledge & experience in assembling/troubleshooting & repairing all types of
* Should have knowledge & experience on how to dismantle, assemble, diagnose the problem & repair pumps & sequence/operation of water Pump. * Should have experience & knowledge on how to do shaft alignment for large pumps
Should have knowledge & experience in commissioning, troubleshooting & repairing all types of sewage pumps & control Panels, * Able to do piping work such as PPR & PVC * Good English speaking & writing * Able to write technical report * Min 3-5 years
5 – 10 Yrs. experience in Industrial electrical(BE Electrical)
5 – 10 Yrs. experience in Diesel mechanic with agricultural equipment
Should be known Agricultural input inventory maintains
15 – 20 Yrs. experience in both Open Field and Hydroponic system and Farm.
Minimum 2 years Rope access technician with Scaffolding experience in the Oil and Gas industry / Offshore
Minimum 2 years Rope access technician with Cable pulling experience in the Oil and Gas industry / Offshore
Minimum 2 years Rope access technician/Supervisor experience in the Oil and Gas industry / Offshore
Minimum 2 years Rope access Inspector experience in the Oil and Gas industry / Offshore
Minimum 2 years Rope access technician experience in the Oil and Gas industry / Offshore
WITH RELEVANT EXPERIENCE
Relevant Experience
Relevant Experience
With ACP Panelling, Cladding Experience . Need to work in height / Multi storey Big Buildings GLASS INSTALLATION ETC.
• BE in Electrical Engineering (Age maximum 30 years) • Min. 4-year experience in Sales & Marketing of Explosion proof Electrical Products (i.e., PDB, DB, JB, Lighting Fixtures etc.) in Oil & Gas Industry. • Candidates with experience in sales or
• BE in Electrical Engineering. (Age Maximum 40 years) • Min. 10 Year experience in Sales & Marketing of Explosion proof Electrical Products (i.e., PDB, DB, JB, Lighting Fixtures, Control Panels etc.) in Oil & Gas Industry. • Experience in sales a
Candidates having Relevant Experience
Relevant experience in Ammonia Refrigeration Age below 35
Candidates having valid GCC driving license with / without similar experience can be considered.Must speak fluent English.
Qatar driving License(Mrketing / Jr. Mktng min. 3-5 yrs exp)
Qatar driving License(BD Executive min. 5-7 yrs exp.)
BE Mechanical or Auto Engineer / DME with experience in equipment/crane rental logistics company
Diploma or ITI in Electronics Engineering . To trouble shoot Cranes Electronic Panels
With relevant experience & Qatar Light driving license, Diploma in Mechanical/Automobile engineering
ITI/ITC/Diploma with experience in maintenance & 4star/5 star hotels Only Hotel Experience will be accepted
normally with Electrical or mechanical basic qualification and nonjob trained to repair and maintain all electromechanical equipment’s in the hotel such as, • RO Plant • Pumps • Boilers • SPA and Health Club equipment’s • Welding Works
* With Read/Write Knowledge in English and Computer proficiency must * willing to work in warehouse for shifting materials also. * age -22 to 35 * free Recruitment + Accommodation
Must have Shutdown oil & Gas Experience
With technical expertise and extensive experienced outsource business development in manpower recruitment Bachelor’s degree in business, marketing or related field. Minimum of five (5) years experience in sales, marketing or related field. Candida
With Minimum 8 years experience in facility management cos, Knowledge in CAFM
To supervise Accounting Assistants, entry level accounting and support staffs. Researching & collecting highly complex data, preparing clear and concise financial reports and monitoring expenditure and revenue of assigned division/department.
With relevant experience.
With relevant experience.
Specialist work for Testing and Commissioning of motor & generator. Online/Offline Condition Monitoring of Motors (LEAP test) & Generators. Overhauling, assembly, dismantling, repairing, inspection & testing of all type of HT Motors.
At lease 5 years of working experience in material preservation /material management/Warehouse. Certification/accreditation Required: NDT level 1, PMI, permit vision are advantage.
Knowledge and repair of Laundry Equipments like, Washer-Extractors, Hydroextractors/ Spin Dryer. Tumble Dryer.Calendar/Roller Press/Flatwork Ironers.Tunnel Washers/Batch Washers.Folding Machines.Spotting Unit.Cabinet Dryer or Drying Room
with similar Experience in any Resort Oman
2 to 3 years experience in resorts/hotels etc.
Experience from Hotel/Resort & must have swimming experience
Capable to handle Cold Room, Walk-In Chiller, Walk-in Freezer, controller system connections related to refrigeration unit for the cold room chiller unit. Knowledge of Maintenance and trouble shooting.
Preferable Oil & Gas candidates to be lined up and priority for Ex- Kuwait experience candidates with KOC or KGOC approvals.
Preferable Oil & Gas candidates to be lined up and priority for Ex- Kuwait experience candidates with KOC or KGOC approvals.
Preferable Oil & Gas candidates to be lined up and priority for Ex- Kuwait experience candidates with KOC or KGOC approvals.
Preferable Oil & Gas candidates to be lined up and priority for Ex- Kuwait experience candidates with KOC or KGOC approvals.
Preferable Oil & Gas candidates to be lined up and priority for Ex- Kuwait experience candidates with KOC or KGOC approvals.
Preferable Oil & Gas candidates to be lined up and priority for Ex- Kuwait experience candidates with KOC or KGOC approvals.
Preferable Oil & Gas candidates to be lined up and priority for Ex- Kuwait experience candidates with KOC or KGOC approvals.
Preferable Oil & Gas candidates to be lined up and priority for Ex- Kuwait experience candidates with KOC or KGOC approvals.
Preferable Oil & Gas candidates to be lined up and priority for Ex- Kuwait experience candidates with KOC or KGOC approvals.
Preferable Oil & Gas candidates to be lined up and priority for Ex- Kuwait experience candidates with KOC or KGOC approvals.
Preferable Oil & Gas candidates to be lined up and priority for Ex- Kuwait experience candidates with KOC or KGOC approvals.
Preferable Oil & Gas candidates to be lined up and priority for Ex- Kuwait experience candidates with KOC or KGOC approvals.
Welders - Tig (Super Duplex), Arc (5G) Downhill, Arc (6G)
No Experience required. Yung Energetic guys willing to workin factory production. Age max 28 years
Must have experience in Adobe Creative Suite: Photoshop, Illustrator, Adobe Raw. Google Sketchup or Other 3D Software, Photography skills and experienced in CNC or Gcode Software. Age between 25-32 years
with 3 years experience in the field of pastry, cake Gateaux. Age maximum 32 years
With 5 years experience in the filed of Pastry, Cake and gateaux. Age Maximum 32 years
With 3 years experience
With minimum 4 years experience
With 5-6 years’ experience specialize in bakery field into high quality of bread, crossaint etc. Age maximum 32 Yrs
With 7-8 years’ experience specialize in bakery field into high quality of bread, crossaint etc. Age maximum 32 Yrs
8-10 years experience specialize in Baker field into high quality of bread, croissant etc. Age Maximum 32 yrs
ITI/ mechanic relevant experience. Good knowledge on mechanical maintenance of equipments like, pumps, motors, compressors, columns, vessels etc. Petrochemical / oil industry experience preferred
Diploma / ITI in mechanical Engineering. Good knowledge on mechanical maintenance of equipments like, pumps, motors, compressors, columns, vessels etc. Petrochemical / oil industry experience preferred.
Degree / Diploma in mechanical Engineering.• Good knowledge on mechanical maintenance of equipments like, pumps, motors, compressors, columns, vessels etc.• Petrochemical / oil industry experience preferred.
Degree in Facilities Management / Hospitality Management / Catering Management with minimum of 5 years’ experience in Hospitality / Food & Beverage Sector. Excellent communication, organizational, administrative and man-management skills required.
Degree in Facilities Management / Hospitality Management / Catering Management. Service with 10 years experience of which at least 5 years must be in Managerial position in Catering company.
Mininum 8 Years Exp in Industrial Catering. Must Have Gulf Exp
MEP Engineer with similar Experience and specialized in HVAC
Minimum 5 years Experience in IT/Hardware/Software/Networking
* 4 years Engineering Degree Mechanical, Electrical or Civil from a reputed institute.* Minimum 10 years of experience in handling large IFM Projects with experience in the Mechanical, Electrical and civil work of Facilities maintenance.
All must have 4 star or 5 star Indian experience / hotel apartment experience (Gulf).
RELEVANT EXPERIENCE / AGE BELOW 38 YEARS
Having experience from 4 star or 5 star hotel Indian experience OR hotel apartment experience in Gulf.. Age below 35 Yrs
Having experience from 4 star or 5 star hotel Indian experience OR hotel apartment experience in Gulf.
* With minimum 3 to 5 years of experience
* Must have experience in refrigeration Industry.
* Should have 2 to 3 years experience in similar field.
* Must have relevant gulf experience.
* Must have Diploma/Degree in Nursing. * Must have experience appropriate to the position. * Must have good standard of Verbal & Written English. NO IELTS / OET REQUIRED * Must be of professional, caring and empathetic nature.
Should have knowledge of auto spare parts/worked in garages/FMCG industry van sales/Valid Qatar license
Should have valid technical training certificates/experience in paint industry(AUTO) for at least 5-7 years/valid GCC or Qatar license.
Should possess knowledge in the powder coating industry/Valid Qatar license.
* Industrial Training or Tradesman Certificate in relevant field or Diploma in AC or ECE. * Minimum 8 years exp in troubleshooting and maintenance of Electrical Panels, VFDs, VSDs, Electric Motor and other electrical components associated with HVAC.
* Industrial Training or Tradesman Certificate in relevant field or Diploma in AC or ECE.* Minimum 8 years experience in troubleshooting and maintenance of HVAC control panel and other electronic system.
* Industrial Training or Tradesman Certificate in relevant field. * Minimum 8 years experience in dismantling/ assembling / overhauling and repairing HVAC semi - hermetic compressors (reciprocating /screw type)
Finishing Carpenter
More than 5 years experience as a Land Surveyor
with Valid Qatar License
Diploma/ITI above 5 years of experience (Civil)
with similar experience
Experience in maintaining a store of Building Construction materials
Above 7 years of experience Civil Engineer
Above 5 years experience as Document Controller
with similar experience.
2 years experience
Similar experience.
Above 5 years of experience in Building Construction field
Above 5 years of experience in Building Construction field
Above 5 years of experience in Building Construction field
Above 5 years of experience in Building Construction field
Above 5 years of experience in Building Construction field
• University Diploma (3 Years or equivalent) in Instrumentation / Electronics • Minimum 7 years of maintenance experience in Industrial Control Systems in Petrochemical or Fertilizer Industries . Middle East working experience is preferred. Past wor
Should be aware of fabrication works as an additional skill
Minimum 4 years of experience & preferably minimum 2 years of Gulf experience
Minimum 4 years of experience & preferably minimum 2 years of Gulf experience
B. Com graduate with 4-5 years experience in Crusher / construction industry. Gulf experience required
"Should have Qatar license & must be good in English Get Drivers having Qatar license and who could speak English. Company will train them for Patrolling Guard position. Security experience is not mandatory. "
3 Years experience with Qatar Driving License
Must be ready to work in facility management projects. Age below 35 years
Should have experience in service sales & knowledge in Electrical / Plumbing works. Age between 30 – 40 Yrs Must have valid GCC license
"Gulf experienced, minimum 3 years’ experience
Relevant industry experience with valid UAE driving license.
Experience in Refrigeration industry preferred.
with similar experience
with similar experience
Experience in Refrigeration
Candidate with minimum 5 years’ experience in design of HVAC units within the same industry. Should be able to plan and implement the design within the stipulated time and cost. Preferably an engineering graduate (Automobile Industry preferred)
CANDIDATES WITH RELEVANT EXPERIENCE IN FOUR STAR HOTELS PREFERED
CANDIDATES WITH RELEVANT EXPERIENCE IN FOUR STAR HOTELS PREFERED.
With experienced as a Barman along with stock and inventory.
With similar experience.
With similar experience.
Similar experience with stock and inventory experience
CANDIDATES WITH RELEVANT EXPERIENCE IN FOUR STAR HOTELS PREFERED.
CANDIDATES WITH RELEVANT EXPERIENCE IN FOUR STAR HOTELS PREFERED
Experience from five star hotel. Should have opera experience. she must have experience in the similar role handling front desk, managing guests etc..
Minimum 2 years experience from a five star hotel. Have to handle the outlet and room service together.
Should be able to manage at least 2-3 cuisines & who can understand the basic cooking.
Experience in preparing American pizza dough, sauces, toppings & preparing quality pizzas.
With similar experience.
5 to 3 years experience in similar field. (willing to work to fabricate vehicle cabins)
4 to 3 years experience in similar field.
3 to 3 years experience in similar field.
2 to 3 years experience in similar field
With min 8 yrs experience in GCC.
10 Yrs experience in Oil and Gas design and Engineering field, out of which 5 yrs UAE or GCC experience is mandatory .
"Rockwell Controller : 1756-L73 & 1756-L75 SCADA OWS DEVELOPMENT SOFTWARE : 9701-VWSTENE FactoryTalk View Studio Enterprise : 9701M-VWSSPT30 FactoryTalk View SE :9701M-VWSDRT60 FactoryTalk Historian SE : 9518M-HSET10 Experience 7-8Yrs ."
* Diploma with 5 years experience in graphic designing (creative artwork, layout, typesetting) * Should have good knowledge in English.
* Must be familiar with equipment & material and with the whole process of engraving and producing stamps, capable of delivering perfect quality stamps. * Diploma with 5 years experience.
* Perfect binding and/or saddle stitching Muller Martini or similar. * Diploma with 5 years experience in fully operating the machines.
* Capable of fully operating the line (Mullar Martini or similar) * Diploma with 5 years experience in fully operating the machines.
GUK, Stahl or similar. Diploma with 5 years experience in fully operating folding machines. Should have experience in all types of folding versions.
Diploma with 5 years experience in plate processing. Must be familiar with plate processing stages (capable of delivering perfect plates)
* Should be holder of Technical Diploma after the secondary school with 5 years experience in fully operating all the related machines.* Preferred candidates with experience on Heidelberg-Speed master and KBA -Rapida machines or similar.
Diploma with 5 years experience in maintenance of related machines. For non-diploma, minimum 10 years experience is required in the same field.
Should have experience in maintaining sheetfed offset printing machines (Heidelberg, KBA or similar) , cutters (Polar, Schneider - senator or similar), folding (GUK, Stahl or similar), bookbinding and finishing machines .
* Should be holder of Diploma after the secondary school with 5 years experience in controlling the quality of the printed maters in the different production stages along the process from pre-press through printing to the finishing.
Graduate/PG in in Microbiology/Dietetics, minimum 5 years in reputed health care center/catering company. Ex-gulf will be given preference.
• With technical expertise and extensive experienced outsource business development in manpower recruitment • Bachelor’s degree in business, marketing or related field. • Minimum of five (5) years experience in sales, marketing or related.
"B. Tech in Mechanical Engineering with 18-20 years’ experience in Structural/Mechanical project. ONLY WITH PROJECT EXPERIENCE. He should have Gulf experience. Only North Indian candidates required "
English Speaking & Age below 35 Yrs
Mainly for alteration works
 With catering / Hotel experience/Food Store Exp.
With industrial catering experience with min 8 years/gulf exp must.
With facility management company experience.
Must have Catering company experience.
Butchers with hotel/catering experience.
Age must be above 25 years & with minimum 6 years’ experience in bulk cooking.
Age must be above 25 years & with minimum 6 years’ experience in bulk cooking.
Age must be above 25 years & with minimum 6 years’ experience in bulk cooking.
Age must be above 25 years & with minimum 6 years’ experience in bulk cooking.
English speaking , 8-10 years Security background and 3-4 Gulf experiences in similar capacity. Presentable and physically fit.
* Diploma/BICS – soft services qualification* Minimum 8 years hands on experience in the Housekeeping /maintenance  (Sound knowledge in hotel or mall operation , including Min. 4 years in Gulf.
* Diploma/ITI - Electrical* Minimum 4-6 years hands on Experience in the field of Electrical Maintenance (Sound knowledge in LV, ELV, PLC. (HV will be an added qualification)Â including min. 3 years in Gulf.
Diploma/ITI - A/C & Refrigeration.Minimum 4-6 years hands on Experience in the mall /building of HVAC Operations/Maintenance including Min. 3 years in Gulf.
* Degree Electrical/Mechanical or Electronics* Minimum 8 years’ experience in the similar capacity /maintenance  (Sound knowledge in community /hotel or mall operation , including Min. 4 years in Gulf.
Graduate / Under Graduate with minimum 1 years’ experience as Cashier, sales, customer service in Money Exchange/Financial Institution/Banking Sector/ BPO/Hotel Front office/ Travel Industry etc.is to be considered. Knowledge to work with all major cu
Excavator Operators with valid Qatar driving license.
Heavy Drivers with valid Qatar license.
Only for ECNR candidates. Age must be below 35 Yrs.
B.Tech in Mechanical Engineering with 15+ years experience in Middle East Oil & Gas Shutdown Projects. Age must be below 45 Yrs.
Cooks with experience in Continental cuisines.
Candidates with similar work experience .
Minimum 2 - 3 years of experience as a Waiter/Barman.
6-7 years experience in the similar profile.
Must have Gulf experience with excellent written & oral communication. Must have oil & gas experience (Conducting Safety induction, Security rules etc..)
FRCEM & experience working at Consultant level and experience of UK or similar working practices.
FRCEM & experience working at Consultant level.
Experience working at Consultant level and experience of UK or similar working practices.
FRCPath or show evidence of equivalent qualification.
MRCP or equivalent, FRCPath or equivalent.
FRCA, Must have NHS experience at Consultant level.
Must have experience at Consultant level
Must have experience at Consultant level.
Must have experience at Consultant level.
MRCP and experience working at Consultant level.